Users can face the problem of Fix: ssh_exchange_identification: read: connection reset by peer if they try to ssh into any type of Unix server.

Across the whole Unix and Linux, ssh is universal. So with every time the remote server resetting the connection without the user’s permission, this problem may occur.

This problem can also happen with the users having windows with Cygwin as they try to access Ubuntu or macOS.

With the terminal to ssh into Arch, CentOS, or Fedora. But this problem is fixable and here is how you do it.

How to Fix: ssh_exchange_identification: read: connection reset by peer

Users are advised to follow the below listed steps properly to solve the problem of Fix: ssh_exchange_identification: read: connection reset by peer –

Method 1: Check the hosts.deny File

In the cases of users having administrative advantages on the server, they can prompt a log directly into the server of the computer.

There they can have a look at the hosts.deny file. This is the easiest way to solve the problem.

Step 1:  At first type ‘sudo nano/etc/hosts.deny on the server. There the users can check if their machine is listed as banned.

Step 2: Then if the machine is listed under banned, users can remove it. Then it is to be reconnected via ssh on another computer. Now type sudo/etc/hosts.allow.

Users should keep in mind that if they add them manually, it is needed to follow the informational text.

Like they need to add All: yourstechy.com so that everyone on yourstechy.com can connect to the server. At last press Ctrl + O and save the file. Then exit by pressing Ctrl + X.

Users can follow this method of Check the hosts.deny file to solve the problem of Fix: ssh_exchange_identification: read: connection reset by peer i.

Method 2: Changing ssh Configuration Options

Users should do as the bellow listed steps –

Step 1: At first, clear out old ssh configuration files.

Step 2: If this method doesn’t work, add the v option and make an attempt to connect again.

Step 3: If the machine still shows an error message, then add – caes256-ctr to the ssh command.

Step 4: When the trouble is in any types of Cisco branded goods, add – c aes256-ctr to ssh command to solve the problem.

Users can follow this method of changing ssh configuration options file to solve the problem of Fix: ssh_exchange_identification: read: connection reset by peer i.

Method 3: Overriding Accidental IP Bans

The server can take the user as a bad IP address if there’s a continuous try to log in and denial. To ensure that this is not the case –

Step 1: At first run sudo iptables – L – line – number to find the IP adress.

Step 2: After finding the problem, run iptables-D and offending chain, chain number so that software won’t ban the user again.

Step 3: Then edit the file named /etc/fail2ban/jail.conf. Now run sudo nano/etc/fail2ban/jail.conf.

Step 4: Add IP address to this line. It will ban fail2ban to add the users’ IP address to any kind of blocklist.

Conclusion

Users can follow the above-listed methods to solve the problem of Fix: ssh_exchange_identification: read: connection reset by peer.

WiFi services are pretty common nowadays. People use WiFi for better Internet connection which is needed for their works.

But sometimes, users of some laptops like the 15r inspiration series, HP ultrabook series are facing some problems with using WiFi connections in their laptops pr computers.

People use this type of laptop for performance and durability. But facing this problem is decreasing their satisfaction level. In some cases, users have reported that the WiFi connection is getting terminated in their laptops.

After some time of using the WiFi connection normal and work properly, a yellow exclamation sign appears in the system tray. The connection fails after this incident.

Users can’t find the WiFi connection. This incident is pretty frequent with users. Normally they reset their WiFi card or restart their laptop to fix the problem.

This may solve the problem temporarily but it will occur again in the future. So in order to fix the problem, one needs to understand the cause which triggers this problem.

Why Your PC Keeps Dropping Your Wireless Connection?

Hardware or driver of the laptop or computer can be cause for which your pc keeps dropping your wireless connection.

Sometimes this problem may occur when the drivers of the comp can not cope up with the operating system.

Usually in such a case like the wireless card is sent to sleep by computer to save on battery. But the device can’t wake up in need for the driver issue.

One can interchange the computer and the network. If the problem still appears in both cases, then both the computer and router or ISP can be the cause of the problem.

One should type network diagnostic in the start menu then click on identity and fix network issues.

Thus network diagnostic tool can be used by the users to fix the problem. They also can use the below-listed methods to solve the problem of WiFi keeps disconnecting –

Method 1: Download and Install Updated Drivers

Users can try to download drivers. They should follow the below-listed steps –

Step 1: At first, the user should go to the website of his driver manufacturer company. Then go to the driver’s section. Now download the driver needed for his device and operating system by double-clicking on that. At last install the updated driver.

Step 2: Users can always go to the download center. There the online service can automatically detect the driver needed for pc. Users should click on get started. Then detection software should be installed. The system will automatically find the driver. Now the user can download and install.

Users can try this method of downloading and installing updated drivers to fix the problem of WiFi keeps disconnecting.

Method 2: Don’t Allow Windows to Turn Off Your Wireless Device

Users should follow the below listed steps properly –

Step 1: At first Windows key +R is to be pressed.

Step 2: Now type devmgmt.msc in the run dialogue box. Now hit enter and open the device manager window.

Step 3: Next navigate to the network adapters section. Expand it

Step 4: Therefore click right on the wireless device. Then click on properties.

Step 5: Then click on power management tab under the properties window.

Step 6: At last, uncheck allow the computer to turn off this device to save power. Now click ok.

Method 3: Reconfigure Your Wireless Adapter

Users can change the channel frequency range detection to the auto option. Thus users can avoid the problem of nonconventional frequency ranges. Follow the below listed steps –

Step 1: At first, users should press Windows + R

Step 2: Then type ncpa.cpl. Now hit enter and open the window of network adapters.

Step 3: Now click right on the WiFi adapter. Then select properties.

Step 4: Therefore configure is to be clicked.

Step 5: At last, navigate to Advanced tab. There look for the property named 802.11n value and the 20/40 coexistence. Both the values are to be changed to auto.

Users can try this method of “Reconfigure your wireless adapter” to fix the problem of WiFi keeps disconnecting.

Conclusion

Users can try the above-listed methods to solve the problem of WiFi keeps disconnecting. Users should also ensure the fact that the router is having enough power.

12/5 jack and the plug are properly connected. Users should also make sure that this is kept away from electrical machines.

Because WiFi waves are often interfered by electrical machines like microwaves and coffee makers.

A lot of users who are using Discord are having the No Route error in their discord which makes them unable to join the voice channels.

This error is much similar to the other errors like the Stuck RTC Connecting error and ICE checking error. In all of these errors, Discords get stopped while you are trying to connect with the voice server.

What is Causing the Discord No Route Error?

After going through a lot of reports from various users and investigating this error, we have come to some of the causal reasons for this error which may trigger it in your Discord.ets check out them.

The IP address of your PC is changed – This reason mostly occurs when the Dynamic IP gets changed again and again. It can be solved just by restarting the modem, router and computer.

Any 3rd party antivirus is blocking your discord – If the antivirus is blocking your discord then it will become unable to maintain a connection with another server and that’s why you are having this error.

Your device is using VPN without UDP – This is the most common reason for the error. The discord is made to work with both VPN solutions and UDP which stand for User Datagram Protocol.

Network admin might block the Discord – In case you are trying to use discord at school and office using their network then it may possible that they have blocked the discord.

The voice region of the server is incompatible with the client you are using – This can be the reason for error if you are trying to have a connection with a server that is hosted on another continent.

To fix the error in this case, you will just have to ask your admin to change the voice region of the server.

QoS is not working with the network – It may be possible that the network is unable to have support with the High Packet Priority of Quality of Service. To fix the error you just have to disable it from the settings of Voice & Video.

How to Fix No Route Error on Discord? 

Here we go with the list of best and effective methods which will surely help you to get rid of the error No Route Error which you may have on your Discord. So let’s have a look on them.

Method 1: Restart Modem + Router + Computer

The first method to fix this error is to make sure that you can not fix the error just by simple restarting.

The No Route error can also be triggered if the IPV6 connection is getting disturbed by a changing Dynamic IP address.

Restart your Router and PC to check if you are having this error for a temporary period. Resetting the network settings of your router is not mandatory.

Just unplug the cable from the socket and then replug it. Now finally you will have to check if the error is resolved now and you are not having the No Route Error. If it still occurs then move on to the next solution.

Method 2: Uninstall 3rd party Firewall or Whitelist Discord 

The next possible causal reason which can trigger this error is any third-party antivirus or Firewall which may cause the Discord unable to work properly.

Sometimes these antivirus may report discord as culprits and may block them. This may result in the Discord unable to make outgoing connections and thus causing the error.

You just have to uninstall antivirus or Firewall from your device to check if it is applicable. Follow the steps mentioned below to do so.

Step 1: Press the combination of keys Windows key + R to launch the Run dialog box. Now put the command “appwiz.cpl” in it and hit the Enter key in this free to open Programs and Features.

Step 2: Now go down in the list of Programs and Features and find out the 3rd party security program then choose to uninstall it.

Step 3: Follow the guide provided on your screen in order to uninstall it and make sure you are removing all the leftover files of antivirus from your device.

Step 4: Finally restart your device and check if the issue is fixed.

Method 3: Remove Your VPN or Use One with UDP 

Some of the users have also reported that this error may be caused when they are using a VPN which is not granted to use User Datagram Protocol or UDP. The

Discord is manufactured in a way that they can’t work with the VPN which doesn’t use the UDP or User Datagram Protocol.

In case you are using a VPN then you must consult with the provider of this service to have the information related to the usage of UDP.

You can check out if the issue is caused due to VPN just by disabling it for a while and open the discord to check if there is no error this time.

If you found out that VPN is the culprit for this error then you can uninstall it and go for another VPN or you can disable it while using Discord on your device.

In case, the VPN is not triggering the error then go for our next solution mentioned below.

Method 4: Verify Whether Discord is Blocked by Your Network Admin

If you are having this error on your Discord while using the Discord at school or office using their network then it may be possible that they have blocked such applications.

There is no way that you can allow Discord to build a conversation with another server. You can just go through the given steps –

Step 1: Press a combination of keys Windows key + R in order to launch the Run dialog box. Then put command “control” and hit the Enter key to launch the Control panel.

Step 2: From the Control panel, move to the option Network and Internet, click on it then click on option Network and Sharing Center. Then click on the hyperlink of your connection to your private network.

Step 3: Click the option Properties from the next window. Then move to the Connection tab and click the option Internet Protocol Version 4 (TCP/IPv4) then again click on Properties.

Step 4: Then go below to find the settings of the DNS server then make changes in them to use the below mentioned address of the DNS server. Set the value to 8 8 8 8 and the alternate DNS server value is 8 8 4 4. Save these changes by clicking on OK.

Step 5: Close every window which is opened and restart your device for once. By doing so, when you will start the Discord again it will connect to a new server having no such error. If you are still having this error then check the below-mentioned solution.

Method 5: Change the Voice Region

In case you only get this error on your Discord while you are trying to make a connection with anybody living on another continent.

In that case, it may be possible that the server is having a voice region that is different from yours.

What you can do in such a case is that you can ask the server’s admin to set the different server voice region from the server’s setting.

The admin can change the server’s settings by going to the Server setting then moving to Server Region.

Method 6: Disable QoS from Voice & Video Settings

We have reported many cases of Discord No Route error. In many cases, this error has been solved by using the User settings to disable QoS.

The error is found to happen on some computers which are unable to keep with High Packet Priority Quality of Service.

There is no need to worry as this error can be fixed easily by using the User Settings to disable the QoS or Quality of Service. Follow the steps mentioned below in order to do so –

Step 1: Launch your Discord then click on the icon of gear present at the bottom on the left side.

Step 2: Move to the settings of the application, then click the option Voice & Video.

Step 3: Now move to the quality of services and check your Enable Quality of Service High Packet Priority must be disabled.

Step 4: Launch the Discord again and check if the error of No Route Discord is fixed now. If you are still having the error then move to the next method.

Method 7: Flushing the DNS setting

Some of the users also reported that they can fix the error just by putting some of the commands in Command Prompt in order to reset the IP configuration.

For some of them, this solution is permanent while the rest of them find that they have to repeat the process, again and again, to keep the error away. Follow the step by step guidelines to do so –

Step 1: Press a combination of keys Windows key + R in order to launch a dialogue box. Then put command “cmd” and press combination of keys Ctrl + Shift + Enter in order to launch the Elevated Command Prompt.

Step 2: Now, in the Elevated Command prompt, put the below-mentioned command and then hit the Enter key – ipconfig /release

Step 3: After releasing the current IP configuration put the below-mentioned command then hit the Meter key in order to flush off the DNS –

ipconfig /flushdns

Step 4: At last put the below-mentioned command in order to make the IP configuration to renew – ipconfig /renew

Step 5: Finally reboot your device for once and then check if the error No Route is resolved this time.

Conclusion

In this article, we have discussed the No Route error which you may have on your Discord.

We have provided you some of the most causal reasons which can trigger this error on Discord. Then we have provided you with a list of the most effective solutions to fix the error.

Try them in the given series. If one fails to fix the issue then go for the next one. Don’t follow the next solution if one solved the issue. So just try them out to fix the error. Hope it will be helpful for you. Good luck!

Netflix has became the most popular streaming site all around the world. But as you know there is some issue in everything even Netflix. Sometimes you get the error code on your Netflix.

This error code comes with a message “Oops, something went wrong” which results in halts movie playback.

It is very irritating when you are about to stream a movie or show on your Netflix and suddenly this error arrives. Encountering this error from Netflix might not your cup of tea.

That’s why we have provided you this guide with the most effective solutions to fix this error.

You will have to turn off the Browser extension for sometimes while troubleshooting this process and you will have to clear the browser’s cookies.

How to Fix the Netflix Error Code M7353-5101?

Here, in this article, we have provided you the proper guide to fix the error code M7353-5101 which you may receive on your Netflix. So let’s have a look at them.

1. Turn Off Browser Extensions

For the guide mentioned below to turn off the Browser extension.

Google Chrome

The error code M7353-5101 on your Netflix might because of a browser extension.

Step 1: To fix this, you will have to turn off the extension of your Chrome browser and then put the command chrome://extensions/

in the URL of your browser then hit the Enter key.

Step 2: Now disable the extension by clicking on all toggle buttons blue in colour or you do it just by clicking on the Remove buttons. The extension will be deleted by doing so.

Firefox

Step 1: Press the combination of keys Ctrl + Shift + A hotkey simultaneously.

Step 2: Then select Extension option present on the left side of the tab Add-ons Manager.

Step 3: Now turn off their add-ons by clicking on the blue toggle buttons.

2. Clear your Browser’s Cookies

You should try to clear the cookies and cache from your browser to fix this issue. Follow steps to clear them.

Google Chrome

Step 1: First of all press combination of keys Ctrl + Shift + Del hotkey.

Step 2: Click on the option “All Time” from the list.

Step 3: Click option “Cookies and Cache data”.

Step 4: Click on button “Clear data”.

Firefox

Step 1: Put the given command in URL bar if Firefox and hit the Enter key.

about:preferences#privacy.

Step 2: Click on the button “Clear data”.

Step 3: Check the boxes of Cookies and Cached Web Content then click on the “Clear” option.

3. Turn off Third-party Antivirus Software

Sometimes your third party antivirus software may be the causal reason for this In such conditions, you need to disable this antivirus software to fix this issue. Follow the steps to do so:

Step 1: First of all right click on the icon of the system tray to open the context menu of your third party antivirus.

Step 2: There must be a disable option in the context menu. By selecting this option you can disable the antivirus for some time.

Step 3: Then open your Netflix to check if the issue is resolved now.

4. Disable Proxy Server

If your proxy server is enabled then try to disable it to check if this is the culprit of the error. Follow these steps to disable it.

Step 1: First of all Run accessory by pressing the combination of keys Windows key + R hotkey.

Step 2: Put the given command in Run and hit the Enter key inetcpl.cpl.

Step 3: From the window of Internet Properties, select the Connections tab.

Step 4: Now open the window in the shot by selecting the LAN settings.

Step 5: Now deselect the option of “Use a proxy server” which is present there.

Step 6: Select the OK option to close the window then click on the Apply button.

5. Update Chrome’s Widevine Content Decryption Module

Now try to update the widevine content decryption module of Chrome browser. Sometimes you need to

update it to fix the issue. Follow the below mentioned steps to do so.

Step 1: Put the given command in the URL bar of Chrome then press the Return key. chrome://components/

Step 2: Now select button Check for update for

Widevine. Then restart. Your Chrome when the module gets updated.

Step 3: You can even update your Chrome browser to update the module. To update the browser, put the command chrome://settings/help in the URL bar of the browser then hit the Enter key.

Step 4: Click option “Relaunch” when your browser gets updated.

6. Update Windows 10

Now you have to check if your Windows 10 is updated to the latest version. As old version of Windows can also give rise to the issue. Follow the steps mentioned below to do so.

Step 1: Open search utility of the platform by pressing combination of keys Windows key + S hotkey.

Step 2: Put the command “updates” in search box then click on option “check for updates”.

Step 3: In case there are updated available then download and install the latest updates from the official website of Windows. Don’t download it from any other site.

7. Don’t Utilize Secondary Displays

In case, you are utilising two monitors, then it can also trigger the issue. To fix it, you will have to disconnect the second monitor.

Then open your Netflix and check if the issue has resolved by disconnecting the secondary display.

Conclusion

Everyone loves streaming shows and movies on Netflix. But sometimes you may receive an error code

M7353-5101 on your Netflix. This code comes with a message “Oops, something went wrong”. It is very irritating to have this error while streaming.

There is no need to worry as we have provided you a proper guide to get rid of this error from your Netflix. Just go through the solutions we have provided above and it will be helpful.

Follow them one by one to check which one works for you. Hope it will be helpful for you. Good luck!

Updating Windows to a new version is a very important step to get rid of bugs and issues from the Windows Operating System.

In case you pause the updating for a while, you may have some performance issues, security issues and may report bugs in their operating system.

Most of the devices are set by default default to download the updates automatically.But some of the times, due to some reasons.

The device might become unable to install the new update of Windows which give rise to the error.

In case condition, running the Windows Update Troubleshooter can be helpful as it can automatically fix the error.

But sometimes even the troubleshooter becomes unable to fix the issue. The error makes the operating system of Windows or other applications to install updates when needed.

You will have to manually fix the error in such condition. That’s why here we have provided you the solutions to fix this error. Try them one by one in the same order as we have listed.

How to Fix Service Registration is Missing or Corrupt?

Here we have provided you a guide to fix the error “Service Registration is Missing or Corrupt”.

A lot of people face this error in the Windows Operating System and believe me it is very irritating.

I am pretty sure you are also the one who is facing this issue and that’s why you landed here.

There is no need to worry as we have provided you a list of most effective solutions to fix this error.

Solution 1: Checking if The Windows Update Services Are Up And Working

In this method, you will have to check if the services of your Windows update are working normally.

As some of the times, if your Windows update services do not work in an expected condition, it can lead to the error in this condition. So, follow the steps mentioned below to check it.

Step 1: Press combination of keys Windows + R in order to open the Run application. Then put the command “services.msc” in the dialogue box and hit the Enter key. By doing so, the utility of services will open up having the list of all running services on your device.

Step 2: After opening of the new window search for “Windows Update”. Then right clicking ck on it and click on option Properties.

Step 3: Go to the General tab. Select Dropbox which is present in front of the option Startup type in order to open a list of all options.

Step 4: Click on “Automatic” option then click option “Apply” in order to save changes.

Step 5: From the same Window, click the “Start” option present below the heading of Service status. Now save the changes by clicking on the “Apply” option. Then close the Window.

Step 6: After modifying all the Windows Update service’s properties, go through the same steps again for given reasons –

• Transfer Service
• Background Intelligence
• Cryptographic Service

These options are available in the same list of Windows Update.

Step 7: Restart your device for once to make the changes effective and you must have a good internet connection. Open the Windows once again just to check if the issue is resolved now.

Solution 2: Running Instructions Through Command Prompt

In case the above solution doesn’t work for you then you should go for running some commands in the command prompt in order to fix this issue.

You will have to reset some settings and configurations then you will have to edit the register or restore the Windows. Follow the steps mentioned below to do so.

Step 1: Press the combination of keys Windows + X in order to open the command prompt. Right click on the first option which opens up then click on the option “Run as administrator”.

Step 2: After opening the command prompt, put the given command one by one and hit the Enter key after each one just to execute them.

net stop wuauserv net stop cryptSvc net stop bits

net stop msiserver

ren C:\Windows\SoftwareDistribution SoftwareDistribution.old

ren C:\Windows\System32\catroot2 catroot2.old net start wuauserv

net start cryptSvc net start bits

net start msiserver

Step 3: Keep patience until all the process gets successfully executed and

Step 4: Open Windows Update again to have a look if the issue is resolved this time.

Solution 3: Refreshing Your .NET Files

The files of .NET are present in the core of the computer. A lot of operations don’t work properly in their absence.

So, you will have to manually refresh the .NET files and check if the issue is fixed. Follow the given steps in order to do so.

Step 1: Press combination of keys Windows + R to open dialogue box. Then put the command “control panel” in it and hit the Enter key to open the Control panel.

Step 2: After opening it, select the subheading of that program present below on the left side.

Step 3: After opening the menu, select the option, “Turn Windows features on or off” which is present below the subheading of option Programs and Features.

Step 4: A list will be populated up containing all the features and programs present in your device. You will have to keep patience for it as it may take a while.

Step 5: After getting populated, untick all the boxes having the keyword .NET in order to entirely uninstall the

.NET. The process is a little bit time taking. Click the OK option to save changes.

Step 6: Open Windows for once again and tick on all boxes which you have untick later. Your device will now install the framework. It may take a little bit of time.

Step 7: After installing it, restart your device for once to make the changes effective. Then have a look if the issue is resolved.

Solution 4: Uninstalling Your Antivirus

As you already know that sometimes your antivirus software may conflict with the operating system and can give rise to the error.

In case your antivirus definition is not updated, then it can result in the confliction with the process of Windows update which results in the error.

In such case, you will have to uninstall or disable your antivirus and theck check if it resolved the issue in your case. Follow the steps mentioned below to do so.

Step 1: Press combination of keys Windows + R in order to open Run application. Then put command “control panel” in dialogue box and hit the Enter key.

Step 2: After opening control panel, select the subheading “Uninstall a Program” present on left side.

Step 3: The list of installed programs in your device will listed on the screen. Go through the list to find the antivirus.

Step 4: Right click on antivirus then click option “uninstall”. Restart your device for once after uninstalling the antivirus. Have a look if the issue resolved by doing so.

Note: The uninstalling of antivirus is all on your own risk.

Plugging USB or downloading any of the stuffs from internet in your device should be avoided while there is no antivirus in your device.

In case, the uninstallation of antivirus doesn’t fix the issue then you should reinstall your antivirus in your device.

Solution 5: Running System File Checker

You can scan for the corrupt files present in the operating system by using SFC. It has been present in Microsoft Windows for a long time.

You can diagnose the problems by using it. In this method you have to run SFC to check if the problem is solved. One the given three responses will appear.

• Windows didn’t find any integrity violations
• Windows Resource Protection found corrupt files and repaired them
• Windows Resource Protection found corrupt files but was unable to fix some (or all) of them

Follow the steps mentioned below to do so.

Step 1: Open Run application by pressing combination of keys Windows + R.

Step 2: Put command “taskmgr” in the dialogue box and press Enter key to open task manager.

Step 3: Select the “File” option which you may find on the window at top left side. A list will appear by doing so. Click option“Run new task” from that list.

Step 4: Put command “powershell” in the dialogue box and check the box having statement “Create this task with administrative privileges”.

Step 5: Put command “sfc /scannow” in Windows Powershell and press Enter key. It may take a little while to complete.

In case you get the error with statement by Windows that it found some error but was unable to fix them then you have to put command the given command in Power shell “DISM /Online /Cleanup-Image /RestoreHealth”.

It will download the files which are corrupted from the Windows update. Be patient while doing it as it may take some time and don’t cancel while the process is going on. Restart your device after completion.

Conclusion

In this article, we have provided you the proper guide to troubleshooting the error “Service Registration is Missing or Corrupt”.

This error makes you unable to install a new update for your Windows. Everybody knows updating Windows with a new version is mandatory to get rid of bugs.

It is very irritating to have this error while updating your Windows. Trying out these troubleshoots is not everyone’s cup of tea.

That’s why in our article, we have provided you the proper guide with different methods to fix this issue.

So just try them out and fix the error. Hope it will be helpful for you and thank you for reading this one!